STOMATOGNATIC

Perbedaan Kekuatan Tekan Antara Resin Modified Glass Ionomer Cement dengan Mineral Trioxide Aggregate sebagai Bahan Kaping Pulpa
(The Differences of Compressive Strength between Resin Modified Glass Ionomer Cement and Mineral Trioxide Aggregate as a Pulp Capping Material)

Sartika Puspita

Departemen Biologi Oral, Fakultas Kedokteran Gigi, Universitas Muhammadiyah Yogyakarta, Indonesia

Irma Dewi Setyowati

Program Studi Kedokteran Gigi, Fakultas Kedokteran Gigi, Universitas Muhammadiyah Yogyakarta, Indonesia

Dwi Aji Nugroho

Departemen Dental Material, Fakultas Kedokteran Gigi, Universitas Muhammadiyah Yogyakarta, Indonesia

Widyapramana Dwi Atmaja

Departemen Dental Material, Fakultas Kedokteran Gigi, Universitas Muhammadiyah Yogyakarta, Indonesia

DOI: https://doi.org/10.19184/stoma.v22i2.53742

ABSTRACT

Pulp capping material is one of the factors to determine the success of pulp capping treatment. One of the requirements for pulp capping material is having good mechanical strength. The compressive strength test is a test to determine the mechanical strength and stability of the material. The purpose of this study was to compare the compressive strength between Resin Modified Glass Ionomer Cement and Mineral Trioxide Aggregate as a pulp capping material. The method of the research was experimental laboratory with 12 samples, the samples divided into 2 groups in mold with a diameter 3mm and height 6mm. The first group was Resin Modified Glass Ionomer Cement (Fuji II LC, GC Japan) and the second group was Mineral Trioxide Aggregate (Rootdent®, Technodent Rusia) restored by Resin Modified Glass Ionomer Cement. The compressive strength measurements are using Universal Testing Machine (MPa). The results showed the average compressive strength of Resin Modified Glass Ionomer Resin Cement was 1313.987 MPa and Mineral Trioxide Aggregate was 392.372 MPa. The compressive strength results were analyzed using Mann-Whitney U test with the test results p = 0.004 which showed a significant effect (p <0.05). The conclusion of this study there is a difference in the compressive strength between Resin Modified Glass Ionomer Cement and Mineral Trioxide Aggregate with the highest compressive strength is Resin Modified Glass Ionomer Cement as a pulp capping material..

PDF

Published

31-10-2025

Issue

Vol. 22 No. 2 2025: Jurnal Stomatognaticic

Pages

144-147

License

Page updated

Report abuse